Issue 2, 2010

Remediating plastic waste into carbon nanotubes

Abstract

Polyethylene-based used plastics needs hundreds of years to degrade in atmospheric conditions. Thus, in addition to conventional recycling facilities for polymer waste (PW), innovative solutions are required. This paper describes a solvent-free process that converts PW such as low-density (LD) and high-density polyethylene (HDPE) into multi-walled carbon nanotubes (MWCNTs) via thermal dissociation in the presence of chemical catalysts in a closed system under autogenic pressure. Specifically, the optimization of process parameters, e.g. selection and amounts of catalysts, density effects of PE, autogenic pressure measurements, and a reaction mechanism for the growth of MWCNTs is explained. The composition, morphology, and atomic structure of the as-obtained MWCNTs are characterized employing advanced structural, spectroscopic, and imaging techniques. We have measured the unique magnetic and electrical conductivity behaviours of as-prepared MWCNTs to assess their potential applications as advanced materials. This reproducible process presents an opportunity to use PW as a feedstock for the production of MWCNTs, industrially significant value-added products. Among the known methods for the fabrication of MWCNTs, the present controlled dissociation of PW is one of the inexpensive and straightforward methods.

Graphical abstract: Remediating plastic waste into carbon nanotubes

Article information

Article type
Paper
Submitted
21 Jul 2009
Accepted
19 Oct 2009
First published
23 Nov 2009

J. Environ. Monit., 2010,12, 455-459

Remediating plastic waste into carbon nanotubes

V. G. Pol and P. Thiyagarajan, J. Environ. Monit., 2010, 12, 455 DOI: 10.1039/B914648B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements