_tcm18-9556.gif )
High impact applications, properties and synthesis of exciting new materials
Also of interest
Physics, chemistry and biology of Soft Matter
Subscribers
Non-subscribers
- Purchase article PDF [£27 + taxes]
- Purchase article PDF member offer [£5 + taxes]
Free access
Paper
J. Mater. Chem., 2009, 19, 9121 - 9125, DOI: 10.1039/b916938e
Up-scalable synthesis, structure and charge storage properties of porous microspheres of LiFePO4@C nanocomposites
Feng Yu, Jing-Jie Zhang, Yan-Feng Yang and Guang-Zhi Song
Novel porous micro-spherical aggregates of LiFePO4@C nanocomposites have been synthesized in large quantities via an improved sol–gel method combined with spray drying technology (sol–gel-SD method), which required no surfactants or templates. With this new procedure, a precursor was prepared through the process of sol–gel and subsequent spray drying. A series of analyses, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray (EDX), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and a combined system focused ion beam (FIB)/SEM were performed after the as-obtained LiFePO4@C was heat-treated at 700 °C for 12 h. The as-obtained LiFePO4@C had a large specific surface area (20.2 m2g-1), with an average nano-size of 32 nm and a main pore diameter of 45 nm. Contact with electrolyte occurred easily, which facilitated the electrical and lithium ion diffusion. In comparison with nano-sized LiFePO4@C particles prepared by a sol–gel method, the current product presented a high coulombic efficiency of 97.2%, a large reversible capacity of 133.8 mAh/g and an excellent capacity retention rate close to 100% after 50 cycles. The sol–gel-SD method provides an additional strategy to easily deal with gelatin and shows potential for use in the preparation of similar superstructures of other composites.
RSS feed