De-gassing gas masks with hydrogen peroxide


Those involved in the clear-up of chemical weapons are kept safe by protective clothing such as gas masks. But how do you de-contaminate a gas mask and safely dispose of it when it is a chemical hazard?

The air filters found in protective equipment, which are made of porous materials such as activated carbon that capture harmful substances, can be incinerated. But often the combustion products of chemical warfare agents are also toxic, and can go on to cause environmental damage and future health hazards.

Now, researchers at the Israel Institute for Biological Research have come up with a safer way to clean filters contaminated with three chemical weapons: sarin, VX and sulfur mustard. Simply treating contaminated activated carbon with hydrogen peroxide, a cheap oxidising agent that is easy to get hold of, breaks the adsorbed weapons down into non-toxic products. The team found hydrogen peroxide decomposes more than 95% of the contaminants they tested, and can take as little as one hour when a 20% solution is used. As it is simple, versatile and works quickly at ambient temperature, the team say their approach could be ideal for use on clean-up operations in remote areas.

References

R Osovsky et al, Environ. Sci. Technol., 2014, DOI: 10.1021/es502981y


Related Content

Eliminating Syria's chemical weapons

21 May 2014 Feature

news image

Nina Notman reports on the international efforts to destroy Syria’s stockpiles of chemical agents

Syria’s decision to join Chemical Weapons Convention welcomed

20 September 2013 News and Analysis

news image

Tests confirm sarin was used in the conflict, questions remain regarding how stockpiles will be destroyed.

Most Commented

The nuclear danger of iodine

20 May 2015 Comments

news image

It may not be an element you think of as problematic. But, as Mark Foreman explains, iodine causes very complicated problems ...

The sultan of synthesis

11 April 2014 Feature

news image

Phil Baran is spurring organic chemists to rethink how they make complex compounds, as Mark Peplow discovers