Pressure brings liquid marbles to a sticky end


Scientists in Japan have developed an adhesive that starts out as powder but transforms into glue for hard-to-reach places when pressed. This represents a promising application for liquid marble technology.

Liquid marbles are millimetre-sized liquid droplets that when coated in a hydrophobic powder, lose their wetness. Pressure-sensitive adhesives (PSAs) are viscoelastic polymers that instantly stick to solid surfaces through van der Waals forces. They are used in tapes, labels, post-it notes, spray droplets and adhesives, but PSAs’ sticky nature can make them difficult to handle. Combining these two technologies, Syuji Fujii and his team at the Osaka Institute of Technology in Japan and co-workers at the Max-Planck Institute for Polymer Research in Germany have developed liquid marbles made up of soft poly(n-butyl acrylate) latex polymer particles that form a tacky polymer core coated with a hard hydrophobic calcium carbonate nanoparticle shell. Initially, the marbles show no adhesive properties but by applying shear stress – light contact pressure between finger and thumb for 1–30 seconds – the powder’s nanoparticle layers rupture, allowing the soft inner polymer to ooze out, endowing the material with adhesive properties.

‘Adhesion has been a crucial technology throughout all the ages and lands,’ reflects Fujii. ‘Whether building the Tower of Babel or fabricating smartphones, adhesion technology is absolutely essential. Technologies may come and go but adhesion is unaffected by changes in fashion.’

pressure activated glue

The free-flowing liquid marble powder turns sticky under pressure

Because the PSA powder can be poured into confined and intricate spaces and activated by pressure, this removes the awkwardness of application facing other PSAs. ‘To satisfy desired design properties in the automobile, aerospace and electronics industries, there is a great need to stick together parts with complicated shapes,’ says Fujii. ‘We believe that our powder can stick these parts, which cannot be bonded using PSA tapes and spray droplets.’

‘Some aphids dispose of honey dew – a sticky waste liquid in which they could potentially drown – by ­encapsulating it in a hydrophobic powder to create a soft ball that can be rolled away,’ comments Glen McHale, an expert in applied and materials physics at the University of Northumbria in the UK. ‘Here, this is used as inspiration to encapsulate a sticky, hard-to-handle and transport, pressure-sensitive adhesive into a free-rolling and non-sticky liquid marble – a fantastic biomimetic idea.’

References

This article is free to access until 30 November 2015

S Fujii et al, Mater. Horiz., 2015, DOI: 10.1039/c5mh00203f


Related Content

Mussel adhesive proteins

6 May 2015 Podcast | Compounds

news image

How do mussels stick tight and weather the constant ocean waves? Helen Scales discovers mussel adhesive proteins

Getting stuck in

29 November 2011 Premium contentFeature

news image

Nature produces a wide variety of glues that outperform all synthetic adhesives. Michael Gross looks into this sticky subject

Most Commented

Electric choc treatment promises lower fat chocolate

22 June 2016 Research

news image

Problem of reduced fat chocolate gumming up factories’ pipelines overcome

Behind closed doors: How to win the Nobel prize

7 October 2015 Comments

news image

Bengt Norden addresses the myths and rumours surrounding the world's most prestigious science prize