Graphene resonator drums up interest
25 January 2007
Drum roll please. US scientists have created a one-atom-thick membrane that resonates like a drumskin. Paul McEuen and co-workers at Cornell University, New York, US, stretched a single sheet of graphene - the hexagonal layer of carbon atoms found in graphite and carbon nanotubes - over a trench etched into a silicon dioxide surface.
No sign of a nano-drumstick though: the researchers 'beat' the drum with a voltage or a laser matched to the natural resonant frequency of the graphene sheet. The resonators are ideally suited for mass, force and charge sensing, McEuen reports in Science.1
Other researchers have made similar resonators using beams of silicon or diamond hundreds of atoms thick, but this development represents the thinnest possible vibrating layer. The graphene may only be one atom thick, but McEuen is pleased with his drum's performance. 'It's robust and tough, it's wonderful, and it's also very inert,' he told Chemistry World.
McEuen appears to be well on the way to forming the world's first nano rock band. His group have previously built a resonator using a single carbon nanotube which vibrated like a guitar string. The graphene drumskin offers more realistic potential than the nanotube version, however, as the wiggling of the 2-D sheet can be observed optically by interferometry, which involves passing a second laser through the grapheme and measuring variations in the intensity of the light reflected back from the silicon base.
McEuen also found that the grapheme sheet had a high Young's modulus, a measure of the material's stiffness. Combined with the very low mass of the single sheet, this makes the resonator ideal for highly sensitive mass measurement. Even a single monolayer of gas molecules adsorbed to the sheet's surface could double its mass, and hence the frequency at which it oscillates.
A red laser is used to detect the motion of the resonator by laser interferometery
Andrew Armour, a physicist at the University of Nottingham, UK, agrees that this is 'a very exciting development'. Graphene is 'a wonder material' that is ideally suited to sensing applications of this type, Armour said, adding that sensitivity could be even better if the devices were operated at much lower temperatures. 'I am sure we will see a lot more graphene resonators in the future', he added
For this potential to be realised, McEuen needs a more reliable fabrication technique. The sheets were put in place by rubbing bulk graphene over the substrate like a pencil. 'It's the crudest thing you could imagine,' according to McEuen. The sheet is held in place by van der Waals forces, and some of its vibrational energy is lost. But Armour suggests that if a better way of clamping the graphene to the silicon dioxide could be found then the quality of oscillation could be improved. Crucially, this could allow the frequency, or pitch of the drum, to be tuned.
ReferencesJ S Bunch et al, Science, 2007, 315, 490
Also of interest
Calculations predict that some graphene nanoribbons behave as half-metals, making them a useful material for spin-based electronics (spintronics).
Comment on this story at the Chemistry World blog
Read other posts and join in the discussion
McEuen group homepage
External links will open in a new browser window