README
======


**Author:** Thomas Henkel<thomas.henkel@leibniz-ipht.de>

**Created:** 2026-03-19

**Case:**   stepEmuV2ScaledFixedInletPressureTemplate

**SubDir:** /

**OpenFoamSolver:** interFoam

**OpenFoamVersion:** OpenFoam2406

Usage
=====


For running the simulation customize the settings and run scripts,
initialize the openFoam environment by running the `openfoam2406` script 
from the shell and proceed with the target run script.

**Technical Hint:** When starting the simulation the interface geometries are very coarse
and must slowly converge to the real geometries and target contact angles.
This must be forced by running the first stage of the simulation at very low 
time step size which can be limited in the system/controlDict dictionary by setting
the maxDeltaT value to 1E-10 and increase it successively after some iterations.



Folders and Files 
=================


====================      ===========================================
FileName                  Note                               
====================      ===========================================
0.orig                    Original data for the time step 0 with the initial values
Allclean                  The Allclean Script of the simulation 
Allrun                    The Allrun Script of the simulaiton
Allrun-parallel           The Allrun script for a parallel run 
AllToVTK                  Conversion of the Simulation data to VTK legacy format
constant                  The constant subfolder of the OpenFoam case 
ParametersAndScaling      The folder holing the utilized parameters and scaling rules
Readme.txt                This File 
system                    The system subfolder of the OpenFoam case
VTK_RESULTS_SELECTED      A selection of VTK Datasets from the published simulation run.
postprocessing	          paraview state files for postprocessing  
====================      ===========================================
