Additions and corrections


Bioinspired rice leaf and butterfly wing surface structures combining shark skin and lotus effects

Gregory D. Bixler and Bharat Bhushan*

Soft Matter, 2012, 8, 11271–11284 (DOI: 10.1039/C2SM26655E). Amendment published 26th October 2012.


Figure 2 as it appears in the article is incorrect. The correct version of Figure 2 appears below:

Description: L:\2Production\Suppdata\SM\Additions & Corrections\Pending (i.e. to be put in a print issue in 2012)\C2SM26655E\Fig2.gif

The sentence (on page 8, section 3.2)

"With the top and bottom assembled, the rectangular duct flow channel measured 0.7 mm high by 3.3 mm wide, with the sample section 101 mm long.”

is incorrect and should be disregarded. It should be replaced with

"With the top and bottom assembled, the rectangular duct flow channel measured 1.5 mm high by 3.3 mm wide, with the sample section 101 mm long.”


The sentence (on page 8, section 3.3)

"When the top and bottom were assembled, the rectangular duct flow channel measured 0.7 mm high by 3.3 mm wide, with the sample section 101 mm long.”

is incorrect and should be disregarded. It should be replaced with

"When the top and bottom were assembled, the rectangular duct flow channel measured 1.5 mm high by 3.3 mm wide, with the sample section 101 mm long.”


Figure 10 as it appears in the article is incorrect. The correct version of Figure 10 appears below:

Description: L:\2Production\Suppdata\SM\Additions & Corrections\Pending (i.e. to be put in a print issue in 2012)\C2SM26655E\Fig10.gif


The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.


Back to article