John Riddick - consultant
BSc MScEng CEng FIChemE CChem FRSC EurChem FSaRS CFIOSH Professional Process Safety Engineer
Caldbeck Process Safety (CPS) Inc. is an international Process Safety Engineering and Management (PSM) / HSE / Risk Management technical and management systems consultancy.
CPS has comprehensive expertise in both strategic and operational Process Safety Engineering, HSE and (Enterprise and Operational) Risk Management throughout the complete life cycle, i.e. Concept/FEED – Detailed Design – Commissioning – Operation –Mothballing/Decommissioning. Other services include Occupational Health and Industrial Hygiene risk management.
CPS provides an internationally certified Professional Process Safety Engineer, Chartered Engineer (CEng) and Chartered OHS expert with over 30 years of experience on international multi-site Major Accident Hazards (MAHs), with expert knowledge of Process Safety, HSE (OHS, Occupational Health & Industrial Hygiene) and Risk Management.
CPS has comprehensive international knowledge and experience of developing and implementing best-practice management systems to effectively manage high, medium and low-risk operations, from large corporations to small and medium enterprises.
In addition, CPS provides extensive experience of working with a wide range of stakeholders, including but not limited to: legal personnel including lawyers, etc., regulators, insurers, NGOs, public, unionised personnel, etc.
A core value of CPS is to design, deliver and implement or provide risk management services that are proportional, pragmatic, cost-effective, high quality and provide added value to its clients.
Name |
John Riddick |
---|---|
Qualifications |
BSc MScEng CEng FIChemE CChem FRSC EurChem FSaRS CFIOSH Professional Process Safety Engineer |
Area(s) of expertise |
Marketing and Business Development People Development Regulation, Health and Safety Science, Engineering and Technology Strategy and policy Legal and Expert Witness Services Process Safety Engineering and Management |
Services offered |
Process Safety, HSE (including Occupational Health and Safety [OHS], Occupational Health and Industrial Hygiene) & Risk [Operational and Enterprise] Risk Management Strategy and operational design, planning, implementation, performance measurement and review-audit DNV GL PHAST software Technical Risk Assessment (e.g. Occupied Buildings Analysis, Consequence Analysis, QRA; Dow Fire & Explosion Indices, Escape & Evacuation Risk Assessment (EERA), Emergency Systems Survivability Analysis (ESSA), SIMOPS studies) Facilitation of Hazard Studies & Technical Risk Assessment including: PHA, HAZIDs, HAZOPS, What-If, LOPA, SIL, Bow Ties, ETA, FTA, FMEA, etc. Development & implementation of Process Safety Engineering/Management Philosophy, Standards, Procedures & Guidance documents Design & delivery of bespoke Process Safety & HSE training courses for senior leaders to operational personnel ALARP Demonstrations Design & optimization of Management of Change (MoC) for “Asset”, “Regulatory”, “People” and “Procedural/Administrative” changes Seveso III Safety Report preparation, review, etc. Offshore Safety Case preparation, review, etc. Safety Critical Elements (SCEs) & Performance Standards Design, Implementation & Review Independent expert advice, coaching & technical authority to senior leadership & Management teams, e.g. Directors, etc. Safety in Design (SID) Pre-Start Safety Review (PSSR) Health Risk Assessment (HRA) Emergency Response Planning & Response, including Seveso III MAPPS Enterprise & Operational Risk Management, including design & implementation of Risk Registries Identification, assessment & review of operational PSM & HSE, including inspections, audits Due diligence review of Process Safety Management Systems Legislative compliance review of Process Safety Management / HSE Systems Process Safety Performance Indicators (KPIs) – design and implementation including PSM/HSE Dashboards Identification, assessment & review of Major Accident Events (MAEs) incorporating Major Accident Hazards (MAHs) & Major Accident Threats to Environment (MATTEs) Chemical Risk Assessment - Chemical Safety & Reactivity, GHS, ADR, CLP, etc. Accident Investigation & Analysis, etc. |
Markets served |
Chemicals (Speciality, Fine, Batch & Continuous, etc.) Process Pharmaceuticals Polymers Onshore & Offshore Oil & Gas Petrochemicals Pipelines Water Treatment Metals (Ferrous and Non-Ferrous) Transport (Dangerous Goods) Manufacturing Engineering Mining Pulp & Paper Energy (Fossil Fuel, Gas, Renewables & HEP) Electricity networks Aluminium Smelting Carbon Capture & Storage (CCS) Engineering Design Construction & Commissioning |
Geographic regions served |
International |
Online |
LinkedIn: https://www.linkedin.com/in/john-m-riddick-msceng-ceng-ficheme-ppse-9605489/ |