Issue 1, 2009

Measuring the influence of UV reflection from vertical metal surfaces on humans

Abstract

Erythemal UV exposure for individuals involved in outside activities are affected according to surrounding structures in an urban environment. Occupational UV exposure is likely to increase by the effects of surrounding structures. UV reflections from surrounding structures, in this case vertical metal walls, were investigated for their influence on erythemal UV exposure in the southern hemisphere. Multiple dosimeters were placed at specific features on head forms, for three different vertical wall conditions, measured at hourly intervals, providing a more detailed representation of the effect of nearby (north facing) reflective wall, non-reflective wall and no wall on UV exposure for a construction worker facing the wall direction. Two types of metal sheeting walls were investigated, with the first type (shiny and smooth in appearance) showing results that indicate the UV reflectance from this surface can increase the average erythemal UV exposure by at least 20% and up to an average of 50% for certain facial positions, compared to no wall and up to 300% compared to a non-reflective wall. A second metal sheeting type coated with colour, does not show as much influence on UV exposure for larger solar zenith angles compared to the first type of metal sheeting, but for smaller solar zenith angles provides an influence that approaches similar erythemal UV exposure to that when no wall is present. The time to reach the exposure limits defined by regulatory bodies for occupational UV exposure can be decreased if the first type of metal sheeting is in proximity to an outdoor worker. The experimental method of this study leads to discussion of how metal surfaces used in the construction industry physically reflect UV radiation. The conclusion is that albedo, which is traditionally used to measure UV reflection, is not an appropriate quantity to explore UV reflection from vertical metal surfaces. This may be due to the reason that metal surfaces seem to involve specular reflection as well as diffuse reflection.

Graphical abstract: Measuring the influence of UV reflection from vertical metal surfaces on humans

Article information

Article type
Paper
Submitted
12 Aug 2008
Accepted
10 Oct 2008
First published
31 Oct 2008

Photochem. Photobiol. Sci., 2009,8, 62-69

Measuring the influence of UV reflection from vertical metal surfaces on humans

J. Turner and A. V. Parisi, Photochem. Photobiol. Sci., 2009, 8, 62 DOI: 10.1039/B814006E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements